The installation of track magnetic suction lights and the situations that need to be avoided in daily use

During the installation process of track magnetic absorption lamps, it is advisable to avoid touching the surface of the lamp with hands as much as possible, and to avoid installing it near heat sources and corrosive gases. If these are not installed carefully, these environments have a significant impact on the service life of track magnetic absorption lights. When installing, it is important to ensure that there are no fire hazards and choose areas without fire hazards that do not vibrate or sway.

It should be noted that the guide rail of the magnetic absorption lamp contains voltage input, and there are conductive metal strips on both sides of the track. There are rotatable conductive copper sheets at the connection of the track lamp. When installed, when the conductive copper strip on the track light comes into contact with the conductive metal strip inside the track, the track light will be powered on and light up.

In addition, when using magnetic suction lamps in daily life, we should avoid frequent switching, because when the lamp is frequently started, the current passing through the filament is greater than the current during normal operation. The temperature of the filament rises sharply and accelerates sublimation. Reduce its service life, so we need to reduce the frequent switching of track magnetic suction lights in our daily lives.